Synway Syn_PBX100 U100, Руководство пользователя, Страница: 91 / 132

Copyright ©Synway All Rights Reserved90 / 132 V2.1.2
Now the L2TP VPN client can connect to the L2TP VPN server.
L2TP VPN Client
For example, in the branch office you are going to connect another SYN_PBX system to the head
office usingL2TP VPN.
Navigate to the web menu
Network Settings->VPN Client . Check the radio button of L2TP to
configure L2TP VPN client.

Enable : Tick to enable L2TP VPN client.

Server Address : L2TP server public IP.

Username : L2TP VPN user name given by the VPN server.

Password : L2TP VPN user password given by the VPN server.

IPSec : Enable IPSec support.

IPSec Local IP :Syn_PBX WAN IP Address that can access the Internet.

IPSec Password : Set according to the password specified on the server.

Default Gateway : All traffic goes through the L2TP VPN connection.
Notice :
If connection is successfully established, the system will display as follows:
Status: L2TP client VPN remote IP address 172.16.0.1
L2TP client VPN local IP address 172.16.0.x (An IP address between 172.16.0.2 and 172.16.0.9)
5.3.2 PPTP VPN
The Point-to-Point Tunneling Protocol (PPTP) uses a control channel over TCP and a GRE tunnel
operating to encapsulate PPP packets. The intended use of this protocol is to provide security
levels and remote access levels comparable with typical VPN products.