Synway Syn_PBX100 U100, Руководство пользователя, Страница: 27 / 132

Copyright ©Synway All Rights Reserved26 / 132 V2.1.2
generated by the SYN_PBX system. Auto generated password consists of numbers, letters
and special characters. If this is an analog extension then password is of no use as analog
phones are not required to register.

Outbound CID : Choose a number to show to the external called party. This feature only
works with E1/T1, BRI and SIP trunks if the telco/ITSP(Internet Telephony Service Provider)
allows this number to be passed.

DialPlan : Defines which type of numbers the extension can dial.

Analog Phone : The FXS port number. An analog phone attached to this port will use this
extension number.
Voicemail

Enable : Activate voicemail service for this extension.

Password : Password for extension user to access the voicemail facilities.

Delete VMail : Delete voice messages if the system has sent the message to user via email.

Email : Email address of this extension user.
Other Options

Web Manager : If enabled, users can use their extension number and voicemail password to
login to the SYN_PBX system web GUI.
 Agent : If enabled, this user extension can be a call queue agent.

Call Waiting : With this option enabled, busy extensions will hear the call-waiting tone, and
can use hook-flash to switch between callers. This option is only for analog extensions, for IP
extensions you have to configure this feature directly on the IP phones.

Allow Been Spied : Enable this option to allow other extension users the ability to spy on the
phone calls of this extension by using feature codes.

Pickup Group : Define a pickup group for this extension, extensions in the same pickup group
can help pick-up an incoming call on other ringing extensions in the same pickup group using
feature code *8. Available values are from 0 to 63.

Mobility Extension : An external number can be specified here e.g. your mobile phone
number. If you now call the SYN_PBX using the mobile phone specified, you will hear a dial
tone and will have full access to the SYN_PBX system functionalities just as a standard
extension user does.
 Mobility Extension Number : When “Mobility Extension” as described above is enabled,
enter your external phone number here.
VoIP Settings

NAT : Check this option if extension user or the phone is located behind a router.

Transport : Choose UDP, TCP or TLS as the transport protocol for SIP signaling.

SRTP : Secure Real-time Transport Protocol(SRTP) encrypts the RTP traffic to secure your VoIP
phone calls. Before enabling this option you need to ensure the end point can also support
SRTP.