Copyright ©Synway All Rights Reserved52 / 132
V2.1.2
Opermode
: Set the Opermode for FXO Ports.
ToneZone
: Select the tone zone of your country.
Ring Timeout(s)
: FXO (FXS signaled) devices must have a timeout to determine if it should
hang up before the line is answered. This value can be tweaked to shorten how long it takes
before DAHDI considers a non-ringing line to have hung-up.
Relax DTMF
: Helps DTMF signal detection.
Send Caller ID After
: Certain countries (UK) have ring tones with different ring tones
(ring-ring),which means the caller ID needs to be set later on, and not just after the first ring,
as per the default (1).
Echo Cancel
: Enable/Disable software Echo Cancel algorithm.
Echo Training
: Enabling echo training will cause the PBX system to mute the channel, send
an impulse, and use the impulse response to pre-train the echo canceller so it can start out
with a much closer idea of the actual echo. Value may be "yes", "no", or a number of
milliseconds to delay before training (default = 400). This option does not apply to hardware
echo cancellers.
4.1.3 Global SIP Settings
Global SIP settings allow you to configure some general and advanced options for the IP-PBX
system global SIP preferences. Navigate to web menu
Advanced->Options->SIP Settings
.
General
UDP Port
: SIP over UDP service port. By default Synway SYN_PBX system uses UDP as SIP
transmission protocol. Port number can be changed here if required.
TCP Port
: By ticking the “
Enable
” checkbox you can enable global SIP TCP support. To
register a SIP extension over TCP protocol, you’ll have to select TCP transport on the
extension configure page, please refer to
chapter 2.7.1
.
TLS Port
: By ticking the “
Enable
” checkbox you can enable global SIP TLS support. To register
a SIP extension over TLS protocol, you’ll have to select TLS transport on the extension
configuration page, please refer to
chapter 2.7.1
.
Start RTP Port
/
End RTP Port
: The UDP ports used by Syn_PBX system to carry RTP voice
Содержание Syn_PBX100 U100
Страница 1: ......