Synway Syn_PBX100 U100, Руководство пользователя, Страница: 119 / 132

Copyright ©Synway All Rights Reserved118 / 132 V2.1.2
SYN_PBX cannot access the Internet. You can choose to manually set the system time by checking
“Manual Time Set” radio button.
There are two ways to manually set a time on the system.
1. Manually input the time and date info and click “
Save ”.
2. Synchronize the SYN_PBX system time with your PC time by clicking “ Sync ” button and then
click on “ Save ” button.
Once “ Save ” is clicked the time is manually written or synchronized from the PC and will be
stored into the hardware clock chip on the SYN_PBX motherboard.
8.2 Module Settings
SYNWAYSyn_PBX80 and SYN_PBX100 systems need proper module settings to load correct
drivers and configure files to drive the E1 and BRI telephony modules.
Default module settings are with module types FXS/FXO/GSM/WCDMA on both telephony
module slots. So if you don’t have E1 and BRI modules installed then you don’t have to configure
module settings.
8.2.1 E1 PRI Settings
To configure module settings please navigate to
System->Module Settings
page.