Syntec 70SB, Руководство пользователя

Страница: 9 / 46

自動化產品
/Automation Products
–
70SB Laser Marking Machine Assembly Manual(Discontinued)
Mechanism installation – 9
1 Remove the laser source
and sort out the optical
fiber wire When removing the laser source, make
sure that the optical fiber will not bent
too much. The excessive bending will
lead to the breakage of the optical
fiber.
It is suggested that two people carry
the laser source for installation.
The optical fiber to the laser source
host should not be disassembled
arbitrarily, which will cause damage to
the laser source.
2 Fix the collimator to the
light inlet of the
galvanometer module Please ensure that the collimator outlet
is concentric with the light inlet of the
galvanometer.
For installation, please refer to the
simple installation manual, according
to the size of the keyhole of the
galvanometer.
5.3 Controller:
5.3.1 Exterior
5.3.2 Installation
Controller has a sliding rail mounting seat behind it, which can be directly installed on the sliding
rail.