Syntec 70SB, Руководство пользователя

Страница: 27 / 46

自動化產品
/Automation Products
–
70SB Laser Marking Machine Assembly Manual(Discontinued)
Software specification – 27
R17154 Set laser energy The reference parameter
3402 determines the type
of the laser source and fills
the power into the
corresponding R value.
SPI corresponding to the R
value is R881
IPG corresponding to the R
value is R17160
Read/
write
R17155 Set workpiece
rotation angle Set the rotation amount of
laser marking. Change the
unit of rotation amounts
from 10^-6 deg to deg.
angle > 0 denotes
counterclockwise rotation
angle < 0 denotes
clockwise rotation
Read/
write
R17159 The upper machine
stops the lower
machine
processing
mechanism When R17159=1, it triggers
C37 Reset. Read/
write
R17156
~R1715
8 Laser marking
man-machine
system reservatio
R17160
~R1716
2 Laser marking
man-machine
system reservation
9.2 Cascade laser modules
For the NetPLC tandem connection and configuration mode, please refer to the use steps of
the Operating Instructions for the Cascade Laser Module Program
The R value has been used. Please refer to the Operating Instructions for the Cascade Laser
Module Program for the NETPLC and R value definition