Syntec 70SB, Руководство пользователя

Страница: 26 / 46

自動化產品
/Automation Products
–
70SB Laser Marking Machine Assembly Manual(Discontinued)
Software specification – 26
9 Software specification
9.1 Register (R-bit) description
No. Name Description Read-
write
rule
R53 Laser source O
point output Control the power and
laser marking process of
laser sources Read/
write
R17151 Display laser
energy The reference parameter
3402 determines the type
of the laser source and
displays the laser power,
with a unit (%),
corresponding to the R
value, for the type of the
laser source.
SPI corresponding to the R
value is R881
IPG corresponding to the R
value is R17160
Read
R17152 Enter the number
of seconds for
manual laser
marking This R value corresponds to
the manual laser marking
time of the controller.
When this R value is not 0,
the laser is turned on,
shown in seconds. Read/
write
R17153 Remaining seconds
for manual laser
marking This R value corresponds to
the manual laser marking
remaining time of the
controller. When this R
value is 0, the laser is
turned off, shown in
seconds. Read