Synel SY-7000 SDK, Руководство пользователя

Страница: 11 / 54

SY-7000 SDK Manual Terminal Configuration Instructions
11
Chapter 2 -Terminal Configuration Instructions
The following section describes the way in which to initially configure the terminal, using the standard
configuration of the factory default SY-7000 application.
Most of the configuration can be done using the standard Linux system commands via Telnet or Serial
port, as explained in Communication Between the Host and Terminal on page 16 .
2.0.1 Configuration Menu
The terminal is configured using the configuration menu.The configuration menu contains a variety of sub
menus, all of which have their own distinct functions. The default keypad code for accessing the
configuration menu is “00000”.
Below is a sitemap of the configuration menu (ver1.5 as of 03/06/2006):
Configuration
Dates
Set Date and Time
Daylight Savings
Communication
Wired
DHCP
Manually Config
TCP\IP Address
Gateway Address
Subnet Mask
Terminal ID
Wireless
SSID
Security
Wireless Security
WEP
64 Bit
128 Bit
IP Settings
DHCP
Manually Config
TCP\IP Address
Gateway Address
Subnet Mask
Terminal ID
Set Readers
N/A
Accessory Test
N/A
Clock Reset
Reset Clock
Clock Info