Symmetricom ATS-6511A, Руководство пользователя

Страница: 96 / 115

DOC 6511_Release K
ATS-6511A/B/C Users Guide
90
Jam_sync
Description: Synchronizes the system 1 PPS to the reference input. Synchronizes the
system 1 PPS to the GPS 1 PPS in a ATS 6501 or to the fiber 1 PPS in a ATS 6511. This
command may result in a phase jump of the 1 PPS outputs depending on the state of the
unit.
Usage:
jam_sync
List:
Description: Lists the user settings files available to load different system configurations.
Multiple system configurations can be created and stored using the
save
command and then
reloaded later to simplify changing between different system configurations. The
configuration files themselves are stored to the flash card however so changing the flash
card will cause the system to lose the configuration files saved by the user.
Configuration files can contain either an entire system configuration or just a subset of the
system configuration. This allows users to change just the portion of the configuration that
is of interest and keep the rest of the settings the same. The file named "default" however
contains the entire system configuration and is the configuration file that is loaded on
system startup.
By default the save command stores the entire settings tree to the file named "default".
This is the settings file that is loaded at startup so it defines the settings that the system will
be initialized with. Other configurations can be stored by specifying a unique filename.
To view the settings contained within the file simply supply the optional FILENAME
parameter and the system will display the file contents. Likewise, if only a subset of the
file is of interest, specify the optional FILENAME parameter along with the NODE
parameter to view only that portion of the file contents. For instance, typing
list default
fiber lists the fiber positioning settings within the configuration file named default.
Syntax
: list
Command Example:
ATS-6511>list
Query:
ATS-6511>list
default
See Also:
save, load, show, settings
Load:
Description Restore system configuration settings from file. At startup the system loads
the settings in the file named "default" but once initialized a user can load any of the
configuration files previously saved.