Symantec Veritas Cluster Server One, Руководство по установке, Страница: 57 / 210

57 Installing and configuring the VCS One Policy Master
After you install the Policy Master
Table 2-5 describes the DRSG resources in the
haadmin -status
output when
the Policy Master uses disaster recovery. The table contains the resources you
see when you configure two virtual IP addresses for disaster recovery.
Setting the default platform in the VCS One cluster
You may want to make changes at the VCS One cluster level. For example, you
can set the default platform to match the platform that is most prevalent in your
VCS One cluster. If you set the default platform, fewer users have to specify the
platform name.
To set the default platform in the VCS One cluster
◆
Set the default platform in the VCS One cluster. Enter the following:
# /opt/VRTSvcsone/bin/haclus -modify DefaultPlatform
platform
About configuring VCS One
Each system in a VCS One cluster has a unique host name and IP address. In
addition, VCS One uses attributes to match systems and users. The system-level
attribute, SysUserName, which is initially NULL, contains the name of the VCS
pmfiler
Monitors ICMP connectivity between the Policy Master and
the NetApp filer
VCSOneWeb
VCS One web console
Table 2-5 DRSG resources when the Policy Master uses disaster recovery
Resource Description
DRSG
Disaster recovery service group
dr_app
The DRApp resource that manages the disaster recovery
service group (DRSG
drip1
Disaster recovery virtual IP address 1
drip2
Disaster recovery virtual IP address 2
drnic1
NIC device for disaster recovery virtual IP address 1
drnic2
NIC device for disaster recovery virtual IP address 2
Table 2-4 PMSG resources when the Policy Master uses NetApp (continued)
Resource Description