Symantec Veritas Cluster Server One, Руководство по установке, Страница: 119 / 210

119 Upgrading from VCS One 2.0.1 to 5.0
Upgrading the Policy Master
Specifying the target systems
You must specify the names of the systems on which you want to import the VCS
One 2.0.1 configurations.
To specify the target systems
1 At the system names prompt, enter the names of the systems on which you
want to import the VCS One 2.0.1 configurations. Separate each name with a
space. Do not enter fully-qualified domain names or IP addresses. For
example, enter the following:
sys1 sys2
2 Do one of the following:
Deciding about Storage Foundation
Symantec recommends that you use a Storage Foundation as your shared
storage architecture. If Storage Foundation is not installed on all Policy Master
systems, you must confirm that you want to continue without installing Storage
Foundation.
To decide about Storage Foundation
◆
Do one of the following:
Specifying the location of the exported configurations
You must specify the location of the exported authentication and database
configurations.
If you are not prompted about
installing VCS One on a single
system
Go to the next section, “ Deciding about Storage
Foundation .”
If you are prompted about
installing VCS One on a single
system
Enter
y
to continue importing your configurations on a
single Policy Master system.
If you are not prompted about
continuing without Storage
Foundation
Go to the next section, “ Specifying the location of the
exported configurations .”
If you are prompted about
continuing without Storage
Foundation
Enter
y
to continue importing your configuration
without Storage Foundation.