Symantec Veritas Cluster Server One, Руководство по установке

Страница: 24 / 210

24 Getting ready to install VCS One
Running installation prechecks
2 Determine the block device file for the DVD drive. Enter the following:
#
ioscan -fnC disk
3 Make a note of the device file as it applies to your system.
4 Create a directory in which to mount the software disc and mount the disc
using the appropriate drive name. For example, enter the following:
#
mkdir -p /dvdrom
#
/usr/sbin/mount -F cdfs /dev/dsk/c3t2d0 /dvdrom
5 Verify that the disc is mounted. Enter the following:
#
mount
Running the prechecks
You can run installation prechecks on the installer utility menu or from the
command line. The installation precheck utility performs preinstallation checks
on the systems you specify.
If there is an error, the utility provides error details. For example, you might see
an error saying that your server is running on a platform that VCS One does not
support. If that happens, check the
Veritas Cluster Server One Release Notes for
information about supported platforms.
Running the prechecks from the installer menu
To run the prechecks from the installer menu, navigate to the directory that
contains the product installer and follow these steps.
To run the prechecks on the installer menu
1 Go to the directory for your platform. Enter the following:
■ On Solaris (10 SPARC 64-bit), enter the following:
#
cd /cdrom/cdrom0/sol_sparc
■ On Linux (RHEL 5 x86_64), enter the following:
#
cd /mnt/cdrom/rhel5_x86_64
2 From the software disc, start the installer. Enter the following:
./installer
3 From the installer menu, perform a preinstallation check. Press P .
Running the prechecks from the command line
To run the prechecks from the command line, navigate to the directory that
contains the product installer and follow these steps.