Symantec Veritas Cluster Server One, Руководство по установке

Страница: 54 / 210

54 Installing and configuring the VCS One Policy Master
Configuring the Policy Master
Configuring other shared storage architectures
The VCS One Policy Master uses a database to store configuration information.
If you do not install Storage Foundation or NetApp, you can choose another
option for shared storage. You can also store the configuration database using
local storage.
If you do not configure Storage Foundation or Network Appliance filer to store
your configuration data, keep in mind the following:
■ VCS One does not automatically mount your storage configuration. You
must manually mount the storage on each system in the Policy Master
cluster.
■ If VCS One faults because it fails to connect to the database directory, you
must troubleshoot the issue manually.
Follow the steps in this section to set up the configuration database using shared
storage, or using local storage.
To set up the configuration database
1 Enter the mount point for the configuration database. For example, enter
the following:
/PM
.
2 Do one of the following:
Starting the Policy Master
You must start the Policy Master after the configuration process.
To start the Policy Master
◆
At the Start VCS One Policy Master processes prompt, enter
y
to start them.
The VCS One Policy Master starts and reports success or failure.
The following directory contains the path to the log files, the summary file,
and the response file that the installation creates:
/var/VRTS/install/logs/
If you are not prompted to
clean up the shared storage
directories
Go to the next section:
“ Starting the Policy Master .”
If you are prompted to clean
up the shared storage
directories
At the prompt for performing cleanup, enter the
following:
y
.
Then, go to the next section:
“ Starting the Policy Master .”