Symantec Veritas Cluster Server One, Руководство по установке

Страница: 122 / 210

122 Upgrading from VCS One 2.0.1 to 5.0
Upgrading the Policy Master
For the remaining migration steps, see the following sections:
■ “ Configuring the Policy Master cluster ” on page 44
■ “ Specifying the authentication services port number ” on page 46
■ “ Configuring virtual IP addresses for the Policy Master ” on page 46
■
“ Choosing a storage architecture to configure ” on page 48
■
“ Configuring your storage architecture ” on page 51
■ “ Configuring disaster recovery ” on page 48
■ “ Starting the Policy Master ” on page 54
(Optional) Creating an ID for the VCS One 5.0 Policy Master cluster
and specifying the virtual IP addresses
Follow the steps in this section to create an ID for your VCS One 5.0 Policy
Master cluster, and specify the Policy Master virtual IP addresses.
Verifying that the VCS One 5.0 Policy Master service group is
online
To verify that the VCS One 5.0 Policy Master service group is online
◆
Enter the following:
#
/opt/VRTSvcsone/bin/hagrp -state
Creating an ID for the 5.0 Policy Master cluster and
specifying the virtual IP address
To create an ID for the 5.0 Policy Master cluster and specify the virtual IP
address
1 Navigate to the directory that contains the upgrade script. For example,
enter the following:
# cd /mnt/rhel5_x86_64/cluster_server_one/
2 Run the command for creating an ID for the Policy Master cluster and
specifying the virtual IP address. Enter the following:
./installvcsonepm -cidvip
3 Enter the name of the system for which you want to create an ID for the 5.0
Policy Master cluster and specify a virtual IP address. For example, enter
the following:
my_machine2