Symantec Veritas Cluster Server One, Руководство по установке

Страница: 41 / 210

41 Installing and configuring the VCS One Policy Master
Installing the Policy Master
To launch the VCS One installer
1 Log on as root on one of the Policy Master cluster systems.
2 On the VCS One software disc, change directories to the platform-specific
directory. Enter the following:
#
cd platform
where
platform
is the platform-specific directory, such as
RHEL5_x86_64
or
sol_sparc
.
3 On the software disc, start the installer script. Enter the following:
#
./installer
4 From the Task menu, select the following task:
Install/Upgrade a Product
5 From the list of products, select
Veritas Cluster Server One by
Symantec - Policy Master .
6 Accept the End User License Agreement (EULA). At the EULA prompt, enter
the following:
y
.
The installer provides information about the installation and configuration.
7 Review the information on each page and press Enter to continue.
Specifying the target system
You must specify the name of the target system for each Policy Master system.
To specify the target system
1 At the system names prompt, enter the names of the systems on which you
want to install the VCS One Policy Master. Separate each name with a space.
Do not enter fully-qualified domain names or IP addresses. For example,
enter the following:
sys1 sys2
Note: If you install the Policy Master on a single system, you only need to
enter one system name.
If you install the Policy Master on a single system, you see a prompt.
2 Do one of the following:
If you install the Policy
Master on multiple systems
Go to the next section, “ Specifying whether to install
Storage Foundation .”
If you install the Policy
Master on a single system
At the single node confirmation prompt, enter
y
.
Then go to the next section, “ Specifying whether to
install Storage Foundation .”