Symantec Veritas Cluster Server One, Руководство по установке

Страница: 53 / 210

53 Installing and configuring the VCS One Policy Master
Configuring the Policy Master
5 Enter the password for accessing the Network Appliance filer. At the
prompt, enter the password again.
6 For each Policy Master system, enter the host name or IP address for each
NIC that is connected to the NetApp Filer. For example, enter the following:
#
thoropt158
.
7 On the NetApp filer you designate to store the VCS One configuration, enter
the exported file system pathname. For example, enter the following:
# /vol/ name_of_volume / name_of_directory_path
8 At the API over SSL prompt, do one of the following:
■ If you do not want to use API over SSL, enter the following:
n
.
■ If you want to use API over SSL, enter the following:
y
. At the prompt,
enter the SSL library path. The path should be on a local disk, and must
contain the libcrypto.so and libssl.so library files. For example, enter
the following:
/usr/lib
.
9 If you have mounted something on the mount point you specified, the
installer asks you if you want to unmount it. Do one of the following:
■ If you are prompted to unmount the mount point, go to
step 10 .
■ If you are not prompted to unmount the mount point, go to
step 11 .
10 At the prompt for unmounting the mount point, do one of the following:
■ If you do not want to unmount the mount point, enter the following:
n
.
■
If you want to unmount the mount point, enter the following:
y
.
11 Confirm that the Network Appliance filer configuration is correct. Enter the
following:
y
.
If the installer uses an existing Network Appliance filer for the
configuration database, you are prompted about cleaning up the shared
storage directories.
12 Do one of the following:
If you are not prompted to
clean up the shared storage
directories
Go to:
“Starting the Policy Master” on page 54.
If you are prompted to clean
up the shared storage
directories
Clean up the shared storage directories to prevent the
installation from failing. At the prompt for
performing cleanup, enter the following:
y
.
Then, go to:
“Starting the Policy Master” on page 54.