Symantec Veritas Cluster Server One, Руководство по установке

Страница: 167 / 210

167 Sample installation output
Installing the VCS One Policy Master with Storage Foundation
Veritas Cluster Server One 5.0.0 by Symantec
You can enter 'b' to go back to the first question.
You can enter '?' for additional information about the question.
Following each set of questions, you are asked to confirm the
information you have entered. To repeat the questions and correct
any previous errors, enter 'n' at the confirmation prompt. No
configuration changes are made to the systems until you answer and
confirm all configuration questions and VCS One PM is installed
successfully.
Press [Enter] to continue:
Configuring the VCS One Policy Master cluster
Veritas Cluster Server One 5.0.0 by Symantec
All nodes are configured to run the Policy Master from the Policy
Master cluster. The VCS One Policy Master cluster provides high
availability to the Policy Master. To configure the Policy Master
cluster, the following information is required:
A cluster name
A unique cluster ID between 0-65535
Two or more NIC cards per system used for heartbeat links
One or more heartbeat links are configured as private links
One heartbeat link may be configured as a low priority link
Configuring all systems to create one cluster
Enter the unique cluster name: [?] vcsonepm_cluster
Enter the unique Cluster ID between 0-65535: [b,q,?] 12312
Discovering NICs on redhat95243 ......................... Discovered
NIC : IP Address
------------------------
eth0 : 10.198.95.243
eth1 : none
eth2 : none
Discovering NICs on pilotvmred9 ......................... Discovered
NIC : IP Address
------------------------
eth0 : 10.198.92.157
eth1 : 192.168.100.101
eth2 : 192.168.100.102
Enter the NIC for the first private heartbeat link on redhat95243:
[b,q,?] eth1