Navigation into the menus
Page 13/28
Programming instructions of the
SYCLOPE INDIG’O
®
IV.
Navigation into the menus
1)
Accessing to the menus
The programming interface of the
SYCLOPE INDIG’O
®
is based on 3 differents levels:
Setting
Menu: to program the working settings such set point, alarms…
Configuration
Menu: to configure the machine such flow switch, analog output…
Factory
Menu: to configure the language, the parameter and the range
Each Menu contains several pages allowing to set or configure the unit.
This table describe the composition of each menu and how to reach them.
Menu
Key
Action
Page
Setting
Simple Press
Calibration
Control
Alarms
Configuration
Press for 5 sec
Dosage
Control relay
Analog output
Flow switch
Sensor (Polarization)
Test
Factory
Press for 5 sec
during switching
on power
Language
Sensor (parameter)
Range
2)
Navigation into the Menu
Once the Menu is reached:
: Permit to scroll the cursor and to valid a modification
: Permit to scroll the setting or the value selected
