Human/Machine interface
Page 10/28
Programming instructions of the
SYCLOPE INDIG’O
®
2)
Permanent display, pictograms and messages
On this display, you can see all the working of your controller:
The measuring value
The set point
The dosing value
The parameter and his unit
The status of the relay
Pictograms and messages for alarms
Visualisation
Signification
Value
Measuring value and unity
Parameter
Showing the measured parameter
Status of relay
Showing status of the relay. Checkmark means that relay is activated
Alarms
Showing the actives alarms
M/A Indicator
Showing status of the control. Auto or STOP
Set point
Value to reach
Dosage
Percent of control on the metering unit
Output
Value sent to the PLC
REG
Free Cl
mg/l
Dosage : 58 %
Set point : 2,00 mg/l
Output : 4,187 mA
2,09
ALR
Status of the relay
Alarms pictograms
Measured parameter
Value and unit
Start/Stop indicator
Informations