70
Basic settings
Dialling pause
In the case of private branch exchanges, it
F: 3 sec.
is necessary to pre-dial an access code
to get a dial tone. In some installations it is
necessary to insert a dialling pause after the
access code. The duration of pause can be
set (1-9 seconds).
> Enter the pause duration via the digit-keys.
Carrier-No.
The stored carrier number is automatically
added in front of all stored numbers.
> Enter the carrier-number via the digit-keys.
Establishing the settings:
Open
Menu
> press
to select „Menu release PIN“
>
Ok
.
Enter 4-digit PIN >
Ok
.
Press
to select „Basic settings“ >
Ok
.
Press
to select „Dialling“ >
Ok
.
Press
to select the desired feature (see above)
>
Ok
.
Establish setting via
or digit keys >
Ok
.
Select further settings or press and hold
Back
to return to
standby mode.
Editing/Deleting
While entering the number, you can delete each last digit
with
and enter new digits via the digit-keys. You can
delete the whole number with
Delete
.
15.3 Setting monitoring features
The factory pre-set (F) of each feature is indicated on the left side.
