17
Alert function
4.5 Programming basic settings „Alert function“
DANGER
In rare cases, the transmission of an alert call can not be
guaranteed.
Please read the safety information in chapter 2.
If you want to use one or more of the alert features „emergency call“, “ra-
dio emergenc call”, “vital sign function”, „fault message“ and/or „test call“,
the following basic settings are necessary:
Basic settings „Alert function“
Page
4.5.1 Switching on the alert function (factory pre-set: switched on)
17
4.5.2 Determining and storing alert call numbers
18
4.5.3 Setting alert parameters
19
4.5.1
Switching the alert function on/off
In factory pre-set the alert function is turned on. If you want to use the
„emergency call“, the “radio emergency call”, the “vital sign function”, the
„fault message call“ and/or the „test call“, so leave the function turned on.
Switching the alert function off
Open
Menu
> press
to select „Menu release PIN“
>
Ok
.
Enter 4-digit PIN >
Ok >
„Alerts“ >
Ok
.
Press
to select „Alerts on/off“ >
Ok
.
Press
to select „Off“
>
Ok
.
Select further settings or press and hold
Back
to return to
standby mode.
Switching on the alert function again
If you want to activate the alert function again, so select
within the procedure the option „On“.
