69
Basic settings
Editing/Deleting
While entering the number, you can delete each last digit
with
and enter new digits via the digit-keys. You can
delete the whole number with
Delete
.
15.2 Setting dialling features
The factory pre-set (F) of each feature is indicated on the left side.
Setting options:
Flash time
You can adjust the recall key for five flash
F: 90 ms
periods of different lengths (see operating
instruction of your PABX).
> Press
to select the times 90, 260,
110,130, 300 msec.
One speed dialling key must be defined for
the recall key (see section 15.4).
Line access code
In the case of some private branch exchan-
ges, it is necessary to insert a dialling pause
after the access code. The access code
determines after which digit the dialling pau-
se takes place.
You can store a line access code up to 4
digits. (see operating instruction of your
PBX).
If a line access code is stored, it must be set
in front of the phone numbers, you want to
enter into a memory (phonebook, speed
dialling, abbreviated dialling).
> Enter the code via digit-keys.
PSIC Primary station
identification code
If you operate a PBX as a secondary station,
you can store a PSIC (4 digit maximum).
The PSI code determines after which digit
the dialling pause takes place.
> Enter the code via digit-keys.
