28
Alerting „Radio emergeny call“
Run. No. Setting and testing the emergency call function
Page
4
5.3.2 Setting the emergency call announcement
24
5
Assigning alert call number(s):
6.4.1 - to the radio transmitter(s)
6.4.2 - to the “open transmitter(s)”
28
30
6
6.4.3 Testing the radio emergency call
32
6.4.1 Assigning alert call number(s) to the radio transmitter(s) and
registering the radio transmitter(s)
If you want to set up one or more radio transmitters (max. 19), you must
assign one or more stored alert call numbers to one or more radio trans-
mitters.
You can also assign the alert call number(s) that you have already asigned
to the emergency call key on the phone. The assigning of numbers and
the registering of the radio transmitter(s) is performed in one procedure.
In addition to the radio pendant other original radio transmitters like radio
smoke detectors or radio cord pull switches can be assigned.
ATTENTION
Program and register the radio transmitter(s) only after ha-
ving connected the telephone to the power supply system!
ATTENTION
In the following procedure it is not the call number itself
which is allocated but instead the memory location in which
the number is stored (see table on the page 18).
Example: If you want to assign the first 3 numbers, so enter
123. If an emergency call is triggered, the numbers are dial-
lied chosen in order of entries.
Open
Menu
> press
to select „Menu release PIN“
>
Ok
.
Enter 4-digit PIN >
Ok >
„Alerts“ >
Ok
.
Press
to select „Call trigger“ >
Ok
.
Press
to select „Radio transm.“ >
Ok
.
Press
to select „Radio transm. 1 - 19“ >
Ok
.
