53
Talkback mode (Auto answer mode)
11.1.2 Description
The phone of the caller must have the function of tone control (DTMF dial-
ling).
The telephone in the room to be monitored rings once in factory pre-set
and after the talkback PIN has been entered switches into listening-in
mode. The caller can listen-in the room and afterwards navigate the con-
versation (hands-free mode, intercom, finishing the call).
Silent monitoring
If you wish to have a „silent monitoring“ without an earlier
ringing signal, you just need to deactivate the ringing signal.
When using the „silent monitoring“, please observe the
Data Protection Law.
11.1.3 Programming and testing „Talkback mode via no. of rings“
You can program and test the function in the following way:
Programming and testing „Talkback mode via number of rings“
Page
11.1.3.1 Activating the „Talkback mode via number of rings“
53
11.1.3.2 Determining Talkback-PIN
54
11.1.3.3 Programming number of rings
54
11.1.3.4 Testing the function „Talkback via number of rings“
55
11.1.3.1 Activating the „Talkback mode via number of rings“
Open
Menu
> press
to select „Menu release PIN“
>
Ok
.
Enter 4-digit PIN >
Ok
.
Press
to select „Talkback“ >
Ok
> „Talkback mode“
>
Ok
.
Press
to select „Via no. of rings >
Ok
.
Select further settings or press and hold
Back
to return to
standby mode.
