Swecoin TTPM2 Скачать руководство пользователя

Страница: 58 / 64

TTPM2 Installation and Programming Manual

September, 99

FW revision Change

2.22

•

A new command !L5 has been implemented. The command ejects a ticket for-

wards into the ”waste bin”. This is useful if the system decides to cancel a
ticket. Only valid for printers with the optional front load function.

•

It is also possible to direct striped and voided tickets to the waste bin by includ-

ing an @ character in the !M string.

•

The 24 V power supply relay is now being switched off after approximately 30 s

of inactivity.

2.23–2.27

•

Never

released.

2.28

•

This version includes support for bar code Code 39. If a bar code is selected,

the print speed will be reduced in order to maintain the print quality.

2.29

•

All versions of this FW release now include the command !I that correctly en-

codes track 3 according to the ISO 7811 format. Reading can be done with
command !D 3.

•

DCT (SGA) version: Handling has been modified slightly to prevent paper jam.

It is also possible to use the printer with only one of the tracks loaded with pa-
per. The self-test, however, uses only the lower input.

2.30

•

This version is only released for the standard version "STD" and corrects a bug

which caused the printer to ignore the single ticket entry if the 24 V relay had
been shut off.

2.31

New version of the dual fanfold ticket entry printer.

In order to increase flexibility two new subcommands have been added to the !L
command.

•

!L17 Loads the lower track into active position.

•

!L18 Loads the upper track into active position.

See description on page 27.

•

Paper is automatically positioned at power on.

2.32

The timeout for the !L3 command is increased.

The printer will automatically try to eject a ticket stuck in the machine during the !L3
command.

Содержание TTPM2

































































Результаты поиска

Содержание TTPM2

Отзывы:

Похожие инструкции для TTPM2

Бренды по названию

Популярные бренды

Swecoin TTPM2, Инструкция по установке и программированию

Результаты поиска

Содержание TTPM2

Отзывы:

Похожие инструкции для TTPM2

Бренды по названию

Популярные бренды