Swecoin TTPM2 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 64

background image

56

TTPM2 Installation and Programming Manual

September, 99

13 FIRMWARE

HISTORY

Functions and features are being added from time to time affecting the firmware in the
TTPM2. The following table lists the changes of general interest.

The TTPM2 firmware, residing in programmable read-only memory (PROM), is available
in several customized versions. They differ only in minor details and are indicated by
three letters. You will find these letters on the label attached to the PROM component.
The standard version, for example, has the letters STD.

The standard version includes support for one consecutive ticket stock track, one rear
single-ticket entry, and the front load option. Please note that only some of the FW ver-
sions after release 2.13 have built-in support for either two consecutive ticket entries or
one consecutive ticket plus one single-ticket entry.

Single track printer PROMs are marked FW906-260, where 90

6

indicates single track and

260 indicates revision 2.60.

Dual track printer PROMs are marked FW907-234, where 90

7

indicates dual track and

234 indicates revision 2.34.

From firmware version 2.70, all firmware is 906-xxx, and you select single track, dual
track, or CD version with the dip-switches on the control board.

Notice that further FW revisions may have been introduced since the issue of this edition
of the TTPM2 Installation and Programming Manual. An up-to-date list of FW revisions
can be read at the Swecoin web site at http://www.swecoin.se.

FW revision Change

2.13

Start of this FW history

2.14

This FW version has only been used for printers in the SGA applications.

•

Handling of dual tracks modified.

•

Ticket will be erased magnetically before being striped or voided.

XON will be sent once every 30 second if XON/XOFF is selected.

2.15

Not released to customers.

2.16

•

Modification to the start up routine. The cutter is no longer operated at start up

since this may damage a ticket inserted from the front in the case of a power
failure in the middle of an operation.

•

Cutter can be initialized by the "3-button reset operation”

•

Time-outs are now implemented for the !L3 function.

Minor modifications to the front load sequence.

«
...
54
55
56
57
58
...
»

Содержание TTPM2

































































Отзывы:

Нет отзывов

Похожие инструкции для TTPM2

Бренд: XINDAK Страницы: 9

Бренд: ICP DAS USA Страницы: 85

Бренд: ICP DAS USA Страницы: 6

Бренд: ICP DAS USA Страницы: 107

Бренд: ICP DAS USA Страницы: 8

Бренд: ICP DAS USA Страницы: 12

Бренд: Goobay Страницы: 24

Бренд: Clever Little Box Страницы: 56

Бренд: Samlexpower Страницы: 56

Бренд: Wacker Neuson Страницы: 36

Бренд: Viking Страницы: 6

Бренд: American Dynamics Страницы: 4

RH l-6K-48ES-5G

Бренд: SOLIS Страницы: 41

Бренд: CYP Страницы: 16

Бренд: MOOD Страницы: 5

XBMC Clearstream

Бренд: Triotech Страницы: 16

IRIS BLUE 3 SQ727 Series

Бренд: SALUPO Страницы: 28

Бренд: Vicruns Страницы: 212

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды