46
TTPM2 Installation and Programming Manual
September, 99
3. Encode and print the ticket with the !P command.
The ticket will be ejected to the operator when correctly encoded and printed. In case of
unsuccessful encoding, the single ticket is cancelled
1
and a new single-ticket form has to
be inserted into the applicable document entry. A blinking yellow indicator prompts this.
8.5
Ejecting the ticket
If you want to eject the ticket without modifying the encoding or adding new print after
reading the magnetic stripe, use an applicable eject command:
!E
Ejects the ticket through the upper rear document entry.
!L4
Ejects the ticket through the front entry.
!L5
Ejects the ticket to the waste bin of the TTPM2 Front Load 2.
1
The number of encoding retries, as well as the text to be printed on cancelled tickets, can be set with the !F M command. See
page 32. Cancelled tickets can be redirected to the optional front load waste bin by inserting an @ character in the string to be
encoded on the stripe, see page 35.
