Swann AMI Turbitrack, Руководство пользователя

Страница: 24 / 72

A-96.250.231 / 130421
AMI Turbitrack
Installation
24
3.7. Input
Note:
Use only potential-free (dry) contacts.
The total resistance (sum of cable resistance and resistance of
the relay contact) must be less than 50 Ω.
Terminals 16/42
If signal output is set to hold, measurement is interrupted if input is
active.
For programming see menu 5.3.4, p. 65
3.8. Relay Contacts
Programming of the relay contacts see 5.3 Relay Contacts, p. 59
3.8.1 Alarm Relay
Note:
Max. load 1 A T / 250 VAC
Alarm output for system errors.
Error codes see , p. 43
Programming see menu 5.3.1, p. 59
Note: With certain alarms and certain settings of the AMI
transmitter the alarm relay does not switch. The error, however, is
shown on the display.
1) usual use
Terminals Description Relay connection
NC
1)
Normally
Closed
10/11 Active (opened) during normal
operation.
Inactive (closed) on error and
loss of power.
NO
Normally
Open
12/11 Active (closed) during normal
operation.
Inactive (opened) on error and
loss of power.
10
12
11
0V
1)
10
12
11
0V