Swann AMI Deltacon DG, Руководство оператора

Страница: 46 / 86

A-96.250.491 / 190121
AMI Deltacon DG
Troubleshooting
46
E012 Temp. 1 disconnected
– Check wiring of temperature sensor
– Check temperature sensor
E013 Case Temp. high
– check case/environment temperature
– check programmed value, see
5.3.1.4.1, p. 71
E014 Case Temp. low
– check case/environment temperature
– check programmed value, see
5.3.1.4.2, p. 72
E015 pH Calculation undef.
– pH out of range (<7.5 or >11.5)
E017 Control time-out
– Check control device or programming
in Installation, Relay contact, Relay 1/2
5.3.2 & 3, p. 72
E018 Degasser disconnected
– check wiring of degasser
E019 Temp. 2 shortened
– check wiring of temperature sensor
– check temp. sensor
E020 Temp. 2 disconnected
– check wiring of temperature sensor
– check temp. sensor
E021 Temp. 3 shortened
– check wiring of temperature sensor
– check temp. sensor
E022 Temp. 3 disconnected
– check wiring of temperature sensor
– check temp. sensor
E023 Degasser Ctl Timeout
–
E024 Input active
– See If Fault Yes is programmed in
Menu see 5.3.4, p. 76
E026 IC LM75
– call service
E028 Signal output open
– check wiring on signal outputs 1 and 2
E029 Calibration degasser
– call service
E030 EEProm Frontend
– call service
E031 Cal. Recout
– call service
E032 Wrong Frontend
– call service
Error Description Corrective action