Suzuki GRAND VITARA JB416, Руководство по обслуживанию

Страница: 277 / 474

Electronic Stability Program: 4F-14
)
C1027
ESP
®
OFF switch circuit
failure
Mechanical switch failure, failure in
switch wiring is shorted to ground.
— — —
)
C1028
Master cylinder pressure
sensor circuit failure
Input signal voltage from master
cylinder pressure sensor in ESP
®
control module is too high or low.
— —
{
)
C1034
Yaw rate / G sensor
assembly power supply
failure
Power supply voltage of yaw rate / G
sensor assembly is too high when
ignition switch OFF.
*2 —
{
Power supply voltage of yaw rate / G
sensor assembly is too low when
ignition switch ON.
)
C1037
Steering angle sensor
power supply failure Power supply voltage to steering
angle sensor is too low.
— — —
)
C1038
Steering angle sensor
detect rolling counter failure
from ESP
®
control module
ESP
®
control module rolling counter
failure is detected by steering angle
sensor. — —
{
)
C1039
Yaw rate / G sensor
assembly internal failure Yaw rate / G sensor assembly
internal failure is detected.
*2 —
{
)
C1040
Stability control system
function failure
Stability control is active for more
than specified time without yaw rate
change.
— —
{
)
C1041
RF
Inlet solenoid valve
circuit failure
Mismatching solenoid output and
solenoid monitor is detected.
{ { {
)
C1042
Outlet solenoid
valve circuit failure
)
C1045
LF
Inlet solenoid valve
circuit failure
)
C1046
Outlet solenoid
valve circuit failure
)
C1051
RR
Inlet solenoid valve
circuit failure
)
C1052
Outlet solenoid
valve circuit failure
)
C1055
LR
Inlet solenoid valve
circuit failure
)
C1056
Outlet solenoid
valve circuit failure
)
C1043
Master cylinder cut solenoid
valve circuit No.1 failure
)
C1044
Master cylinder cut solenoid
valve circuit No.2 failure
)
C1053
Low pressure solenoid
valve circuit No.1 failure
)
C1054
Low pressure solenoid
valve circuit No.2 failure
)
C1050
Back switch failure
Back up light switch and/or switch
circuit failure is detected. (for M/T
model)
— —
{
)
C1057
ESP
®
(ABS) control
module power supply circuit
failure *3
ESP
®
(ABS) control module power
supply voltage is too high.
{ { {
ESP
®
(ABS) control module power
supply voltage is too low.
{
*5
{
)
C1061
Pump motor and/or motor
circuit failure Defective pump motor and/or motor
power supply voltage is too low.
{
—
{
)
C1063
Solenoid valve power
supply driver circuit failure Mismatching solenoid output and
solenoid monitor is detected.
{ { {
DTC
(displayed
on SUZUKI
scan tool)
Diagnostic Items
Detecting condition (DTC will be
set when detecting)
ABS
warning
lamp
EBD
warning
lamp
ESP
®
warning
lamp