Sutter Instrument TRIO MP-235, Руководство по эксплуатации

Страница: 33 / 40

31
TRIO MP-235 THREE-AXIS MICROMANIPULATOR SYSTEM OPERATION MANUAL – REV. 2.23 (20190130) (FW V2.2 & 2.3)
Controller Rear Panel
Port
Connector/Receptacle
Cable Connector
Types
Connects to ... Cable Type Cable
Max.
Length
ROE/Controller Cabinet:
USB
◄─
A
│
─►
B
Computer USB port
APPENDIX D. QUICK REFERENCE
D.1. Manual Operation
D.2. Configuration
Table 1. Configuration Switches 1 – 5.
Sw # Definition State Setting Position
Clockwise Off* Up*
1
X-Axis Knob Rotation for
Forward (+) Movement
Counter On Down
Clockwise Off* Up*
2
Y-Axis Knob Rotation for
Forward (+) Movement
Counter On Down
Clockwise Off* Up*
3
Z-Axis Knob Rotation for
Forward (+) Movement
Counter On Down
Clockwise Off* Up*
4
D-Axis Knob Rotation for
Forward (+) Movement
Counter On Down
Enabled Off Up
5
Y Axis Lock Out for
Homing
Disabled On* Down*
* Normal operation (factory default).
HOME: Move to defined home position. Press again to pause/resume.
WORK: Move to defined work position. Press again to pause/resume.
PULSE: Advances diagonal axis in 2.85
μ m steps. Hold 3-sec. to enter ANGLE
SET mode (active for 10 sec.) – use Knob D to change angle (0 – 90 degrees).
RELATIVE: Toggles between Relative and Absolute position moves. Hold 3-sec. to
set the relative mode origin to the current absolute position.
SPEED: Cycles through Speed 0 (normal) through 3. Hold 3 sec. to enter LOCK
mode.
Setting Home/Work Pos., Relative Mode Origin Pos., & Angle: To set position, hold
down HOME, WORK, & RELATIVE buttons for 3 seconds until beep sounds.
Likewise, set angle with LOCK.
Screen-color mode indications: Green = Absolute position; Blue = Relative
position; Red = Movement in progress or in quiet (LOCK) mode; knobs disabled.
Movement Knobs Disabling and Quiet (LOCK) Mode: Movement knobs are
disabled during movement to Home, Work, external movement command, or while
in quiet (LOCK) Mode.
D-Axis Movement; selects angle in degrees when in ANGLE SET mode.
Z - A x i s
M o v e m e n t
( S y n t h e t i c )
Y - A x i s
M o v e m e n t
X - A x i s
M o v e m e n t
1 2 3 4 5 6 7 8 9 10