Sutter Instrument TRIO MP-235, Руководство по эксплуатации

Страница: 19 / 40

17
TRIO MP-235 THREE-AXIS MICROMANIPULATOR SYSTEM OPERATION MANUAL – REV. 2.23 (20190130) (FW V2.2 & 2.3)
Table 2-8. Length of X Axis (Firmware v2.2+).
Length of X Axis Switch #
25mm 12.5mm **
10 OFF (Up)* ON (Down)
* Factory default (recommended normal operation setting).
** Use the ON (down) setting for half-length (12.5mm) X axis.
CAUTION: Always be certain that the position of Switch 10 correctly matches the physical
length of travel of the X axis on the connected device. Setting the switch to the OFF (up)
position for 25mm could result in equipment damage if the attached device’s X axis length of
travel is actually less than 25mm.
3. OPERATIONS
3.1 Main Controls and Indicators on the ROE/Controller
Figure 3-1. Front view of the TRIO MP-235 ROE/Controller
DISPLAY
Z-AXIS
CONTROL
(Synthetic)
Y-AXIS
CONTROL
D-AXIS
CONTROL
X-AXIS
CONTROL
RELATIVE
MODE
PULSE &
ANGLE-SET
MODES
WORK
POSITION
HOME
POSITION
SPEED &
LOCK
MODES