Sutter Instrument Lambda 10-3, Руководство по эксплуатации

Страница: 18 / 132

LAMBDA 10-3 OPERATION MANUAL – REV. 3.03 (20110829)
6
1.3.6
1.3.6 1.3.6
1.3.6 SmartShutter Mounts
SmartShutter Mounts SmartShutter Mounts
SmartShutter Mounts
An 8-32 screw-mount hole exists on the edge of the SmartShutter opposite the motor, into
which may be attached a mounting post of any desired length. When the SmartShutter is
mounted on a post using this screw-mount hole, the exact center of the shutter aperture is
precisely aligned with the vertical center of the post. Posts of various lengths are available
from Sutter Instrument Co. This post, along with posts of other dimensions, as well as post
holders and bases, are available from most laboratory equipment suppliers.
A SmartShutter can also be mounted on a Sutter Instrument Co. Filter Wheel with a special
enclosure, as well as with other Sutter Instrument Co. products, such as the Lambda LS,
Lambda DG-4, Lambda DG-5, and various Lambda 10 series Filter Wheel controllers. Please
consult with Sutter Instrument Co.’s Technical Support for the different configuration
possibilities.
1.3.7
1.3.7 1.3.7
1.3.7 Cables
Cables Cables
Cables
A special cable is required for connecting a standalone SmartShutter to Ports A and B of the
Lambda 10-3. The CIQ-2 cable is a split cable consisting of one DB-25 connector at the main
end (for connecting to the “SmartShutter” connector A or B on the rear of the Lambda 10-3
cabinet) and a DB-9 connector at each of the split ends. One split end is shorter than the
other. When connecting a single standalone SmartShutter to the Lambda 10-3 Port A or B,
the SmartShutter connects to the DB-9 connector of the longer split, and a terminator is
required to be attached to the DB-9 connector of the shorter split.
NOTE: Dual SmartShutters connected with the CIQ NOTE: Dual SmartShutters connected with the CIQ NOTE: Dual SmartShutters connected with the CIQ NOTE: Dual SmartShutters connected with the CIQ----2 2 2 2 cable connected to the Lambda 10 cable connected to the Lambda 10 cable connected to the Lambda 10 cable connected to the Lambda 10----3 is 3 is 3 is 3 is
not supported. However, the CIQ not supported. However, the CIQ not supported. However, the CIQ not supported. However, the CIQ----2 cable can be used to connect a single standalone 2 cable can be used to connect a single standalone 2 cable can be used to connect a single standalone 2 cable can be used to connect a single standalone
SmartShutter to the 25 SmartShutter to the 25 SmartShutter to the 25 SmartShutter to the 25----pin “SmartShutter” connector f pin “SmartShutter” connector f pin “SmartShutter” connector f pin “SmartShutter” connector for port bay A or B. or port bay A or B. or port bay A or B. or port bay A or B.
When connecting a standalone SmartShutter to a correctly-configured Port C of the Lambda
10-3, only a standard DB-9-to-DB-9 cable is required. Note that older generations of the
Lambda 10-3 do not support a shutter on Port C.
1.3.8
1.3.8 1.3.8
1.3.8 Devices fo
Devices fo Devices fo
Devices for TTL
r TTL r TTL
r TTL----Control of Shutters
Control of Shutters Control of Shutters
Control of Shutters
Two devices are available from Sutter Instrument for the TTL control of shutters that are
attached to the Lambda 10-3.
FSWITCH: FSWITCH: FSWITCH: FSWITCH: A foot switch with BNC connector. It changes the ON/OFF state of the
shutter with each foot press. The state is maintained as long as the switch
remains depressed.
FSTOGGLE:
FSTOGGLE: FSTOGGLE:
FSTOGGLE: Like the FSWITCH, but alternates the ON/OFF state with each foot press.
Adapters
Adapters Adapters
Adapters
Most microscopes, cameras, light sources and other optical instruments to which the Lambda
10-3 Filter Wheel may be interfaced will require some sort of adapter to link the devices.
Adapters for interfacing the Filter Wheel to most instruments are available from Sutter
Instrument Company or can be custom built by Sutter Instrument. Suitable adapters are
Suitable adapters are Suitable adapters are
Suitable adapters are
available from other sources, as well, but Sutter Instrument Company assumes no
available from other sources, as well, but Sutter Instrument Company assumes no available from other sources, as well, but Sutter Instrument Company assumes no
available from other sources, as well, but Sutter Instrument Company assumes no
responsibility for the performance, suitability, and safety of adapters built by the user or
responsibility for the performance, suitability, and safety of adapters built by the user or responsibility for the performance, suitability, and safety of adapters built by the user or
responsibility for the performance, suitability, and safety of adapters built by the user or
other manufacturers.
other manufacturers. other manufacturers. other manufacturers.