Sutter Instrument Lambda 10-3, Руководство по эксплуатации

Страница: 43 / 132

LAMBDA 10-3 OPERATION MANUAL – REV. 3.03 (20110829)
31
3.
3. 3.
3. OPERATIONS
OPERATIONS OPERATIONS
OPERATIONS
3.1 3.1 3.1 3.1 First Time Use First Time Use First Time Use First Time Use
3.1.1 3.1.1 3.1.1 3.1.1 Line Power (Mains) Line Power (Mains) Line Power (Mains) Line Power (Mains)
The power cord provided with the Lambda 10-3 connects to the Power Entry Module located
on the back of the unit (see diagram below). This module also includes the line fuse .
Figure 3-1. Lambda 10-3 cabinet (rear view) showing power connection and fuse.
The power switch is located on the front panel as shown in Figure 3-2.
Figure 3-2. Power switch (front panel).
The Lambda 10-3 has a “universal” power supply that runs on 110 volts or 220 volts AC, 50
or 60 Hz. You do not need to change settings or fuses to suit local conditions. Make certain
that the ON/OFF Switch located on the front panel of the Lambda 10-3 cabinet is turned
OFF. Plug the power cord provided with the Lambda 10-3 into the Line Input socket on the
Power Entry Module and then to a power source of the appropriate voltage and frequency.
You must replace the fuse with the appropriate value (see the Technical Specifications),
otherwise your protection from fire and electric shock will be compromised.