Sutter Instrument Lambda 10-3, Руководство по эксплуатации

Страница: 105 / 132

LAMBDA 10-3 OPERATION MANUAL – REV. 3.03 (20110829)
93
of the next when the delay between moves is slight. This can occur even when the delay
between moves is less than 50 msec.
The 1-inch version of the SmartShutter can operate at opening rates up to about 20 Hz
without problems. Above 20 Hz at certain frequencies, there may be frequent errors in
movement. Avoid operation at these frequencies. The maximum rate of opening is about
40Hz, which normally provides solid operation.
The 35 mm version of the SmartShutter can operate at opening rates up to about 15 Hz
without problems. Above 15 Hz at certain frequencies, there may be frequent errors in
movement. Avoid operation at these frequencies. The maximum rate of opening is about
40Hz, which normally provides solid operation.
It is possible, then, to experience movement errors after changing only the delay interval
between moves. If you are making moves with a short delay interval and errors are produced,
it might be desirable to adjust the interval to obtain the most secure result. Experiment with
small changes in the delay to find the best value and then keep the delay at that value. If you
do see errors in movement, try using a long time interval (1 second) between moves to test
whether the length of the interval is contributing to the error rate.