27
IV. Figure input method screen
Input figure"0.1" ,
1.Press the "Enter" key to enter the input method screen.
2.Move the cursor to the input method selection field by pressing the “Cursor” key.
3.Press the keys “Left shift” and "Right shift" to move cursor to select
.
4.Press the "Cursor" key to move the cursor to the software disc field with the figure letters
input.
5.Press the "Select" key to select ,display"0" in the input field.
6.Press the keys “Left shift”, "Right shift" and "Up shift" to move the cursor to select the ".".
7.Press the "Select" key to select, display "0" in the input field.
8.Press the keys “Left shift”, "Right shift" and "Up shift" to move the cursor to select the "1".
9.Press the "Select" key to select ,display"0.1" in the input field.
10.Press the "Complete" key to exit the input method and complete the input of the bit
number.
V. Special symbols input method screen
Input the special symbol"#",
1.Press the "Enter" key to enter the input method screen.
2.Move the cursor to the input method selection field by pressing the “Cursor” key.
3.Press the keys “Left shift” and "Right shift" to move cursor to select
.
4.Press the "Cursor" key to move the cursor to the software disc field with the special symbol
input.
