20
Average value: The average value of real-time data between the recording points before and
after The average value is calculated by weighted average method.
Maximum value: Take the maximum value of the real-time data between the recording points
before and after.
Minimum value: Take the minimum value of real-time data between the recording points
before and after.
★
Power-on record: New file, continuation from power-off is optional.
New file: Create a new file list to record after power-on.
Continuation from power-off: After power on, the files in record before power off can be
traced to continue recording; when this function is selected, the data during power off can be
displayed -.--.
★
Triggering conditions: Manual, power-on, alarming, relay, timing are optional (Note:
Which triggering conditions under the corresponding triggering mode can be displayed and
modified).
Manual trigger: Enter the storage operation interface of the instrument, manually stop or
manually start data storage records.
Power on: Every time after the power-on is started, the instrument automatically creates new files
and records data.
Alarming trigger: It can be set to start data storage record when a certain alarming
corresponds to a certain channel, and if recording is stopped, the alarming is over.
Relay trigger: When a certain limited relay alarming, start data storage records, and stop recording
when the relay alarming are over.
Relay trigger: It can set that while a limited relay is alarming, start the data storage record,
and while the relay alarming is over, stop recording .
Timing trigger: When the timing cycle period is set 24 hours, set the starting time and end
time so that the instrument can only conduct the store data recording in the set time period every
day.
Operation: in this screen,
Move the cursor according to the "Left shift" and "Right shift" keys.
Adjust the numeric value according to "Down shift", "Up shift", " + " and "-".
Press the "Enter" key to confirm the execution;
Press the "Esc" key to exit this screen. If the content of the screen is modified, it will pop up
the dialogue box "Do you save the modified parameters?" In the dialog box, select "Yes" to
save the modified parameters and "No" to save the modified parameters.
