Chapter 6 Manual Zero Point Windows display codes
www.supmea.com
- 45 -
Automatic Flow Correction
With the function of automatic flow
correction, the flow lost in an offline
session can be estimated and
automatically adjusted. The estimate is
based on the average value, which is
obtained from flow rate before going
offline and flow measured after going
online the next time, multiplied times the
time period that the meter was offline.
Select "ON" to use this function and
"OFF" to cancel this function.
Energy Units Options
Select Energy Units. The factory
default unit is GJ. The following
options are available:
The following units of time are available:
/day ( per day ); /hour ( per hour ); /min
( per minute );/sec ( per second ). The
factory default unit is /hour.
0.Giga Joule (GJ)1.Kilocalorie (Kcal)
2.MBtu
3.Kilojoule (KJ)
4.Btu
5.KWh
6.MWh
Ener gy Uni ts Select
GJ/ h
Automatic Correction
YES
