Chapter 6 Manual Zero Point Windows display codes
www.supmea.com
- 44 -
Date Totalizer
In this window, it is possible to
review the historical flow data
totalizer for any day of the last
64 days, any month of the last
64 months and any year of the
last 5 years.Press
, use the
or
to review totalizer in days,
months and years. "0" for day, "1" for
month, "2" for year.
Use the
or
to review the
totalizer in some day, some month,
some year.For example, to display the
flow total for July 18,2000, the display ""
at the upper right corner of the screen
indicates that it was working properly the
whole day. On the contrary, if "G" is
displayed, it indicates that the
instrument gain was adjusted at least
once. Probably it was offline once on
that day. If "H" is displayed, it indicates
that poor signal was detected at least
once. Also, it indicates that the operation
was interrupted or problems occurred in
the installation.For more information
please refer to "Error Code and
Resolutions".
[82
Date Totali zer
0 .Day
00 03- 04 - 05 -- - - --
>4356.78 m3
00 03- 04 - 05 G- H-I
- 0 m3
