Chapter 6 Manual Zero Point Windows display codes
www.supmea.com
- 41 -
data indicates baud rate, 9600,
19200, 38400, 56000, 57600,
115200 are available.
The second option
indicates parity bit, None
(No verification).Data
length fixed to 8;Stop bit
length for a fixed length.
FO Frequency Range
Set the highest limit of the output
Signal frequency. highest limit
frequency values must be greater
than the lower frequency range
：
1-9999Hz
，
Factory default
：
1~1001Hz.
Note: output frequency signal
output from OCT mouth, so to
output frequency signal, must also
Be set OCT into frequency signal
output mode
（
M78 choose 0. FO).
Low FO Flow Rate
Set up low FO flow rate, i.e. the
corresponding flow value when
output signal frequency is at the
lowest FO frequency. For example,
when the low FO frequency is 0 Hz,
low FO flow rate is 100m3/h then
when the frequency output is 0 Hz,
FO Fr equency Range
1-5000
High FO Flow Rate [ 69
26550 m3/h
