Supero SUPERSERVER 5010E, Руководство пользователя

Страница: 61 / 128

Chapter 5: Advanced Motherboard Setup
5-23
IDE Connectors
There are no jumpers to config-
ure the onboard IDE connectors
J18 and J19. Refer to the table
on the left for pin definitions.
Pin Number Function
1 Reset IDE
3 Host Data 7
5 Host Data 6
7 Host Data 5
9 Host Data 4
11 Host Data 3
13 Host Data 2
15 Host Data 1
17 Host Data 0
19 G N D
21 D R Q 3
23 I/O Write-
25 I/O Read-
27 I O C H R D Y
29 D A C K 3 -
31 I R Q 1 4
33 Addr 1
35 Addr 0
37 Chip Select 0
39 Activity
Pin Number Function
2 G N D
4 Host Data 8
6 Host Data 9
8 Host Data 10
10 Host Data 11
12 Host Data 12
14 Host Data 13
16 Host Data 14
18 Host Data 15
20 K e y
22 G N D
24 G N D
26 G N D
28 B A L E
30 G N D
32 I O C S 1 6 -
34 G N D
36 Addr 2
38 Chip Select 1-
40 G N D
IDE Connector Pin Definitions
(J18, J19)
Floppy Connector
The floppy connector is located
on J26 and requires a 34-pin rib-
bon cable for operation. See the
table on the right for pin defini-
tions.
Pin Number Function
1 G N D
3 G N D
5 K e y
7 G N D
9 G N D
11 G N D
13 G N D
15 G N D
17 G N D
19 G N D
21 G N D
23 G N D
25 G N D
27 G N D
29 G N D
31 G N D
33 G N D
Pin Number Function
2 F D H D I N
4 R e s e r v e d
6 F D E D I N
8 Index-
10 Motor Enable
12 Drive Select B-
14 Drive Select A-
16 Motor Enable
18 D I R -
20 S T E P -
22 Write Data-
24 W r i t e G a t e -
26 Track 00-
28 Write Protect-
30 R e a d D a t a -
32 Side 1 Select-
34 Diskette
Floppy Connector Pin Definitions (J26)
5-10 Floppy/Hard Disk and SCSI Connections
Be aware of the following when connecting the floppy and hard disk drive
cables:
• A red mark on a wire typically designates the location of pin 1.
• A single floppy disk drive ribbon cable has 34 wires and two connectors
to provide for two floppy disk drives. The connector with the twisted
wires always connects to drive A, and the connector that does not have
twisted wires always connects to drive B.