Supero SUPERSERVER 1026TT-IBQF, Руководство пользователя

Страница: 65 / 102

Chapter 6: Advanced Chassis Setup
6-7
Figure 6-6. Removing a Drive
6-6 Power Supply
The 1026TT-TF/1026TT-IBXF/1026TT-IBQF has a single 1200 watt power supply.
This power supply has the capability of operating at 100 - 240 input volts.
Power Supply Failure
If the power supply unit fails, the system will shut down and you will need to replace
the power supply unit. Replacement units can be ordered directly from Supermicro
(see contact information in Chapter 1).
Replacing the Power Supply
Depress both main power buttons on the front of the chassis and then unplug the
AC power cord to completely remove power from the system before removing the
power supply.
Installing a New Power Supply (Figure 6-7)
Replace the failed unit with the exact same power supply model from 1.
Supermicro.
First power down both system nodes with the main power buttons then un- 2.
plug the power cord.
Push the release tab (on the back of the power supply) as illustrated. 3.