Supero SUPERSERVER 1026T-UF, Руководство пользователя

Страница: 67 / 118

Chapter 5: Advanced Serverboard Setup
5-17
ATX PS/2 Keyboard and PS/2
Mouse Ports
The ATX PS/2 keyboard and the PS/2
mouse ports are located beside the
USB ports. See the table on the right
for pin defi nitions.
Power LED/Speaker
On the JD1 header, pins 1-3 are for
a power LED and pins 4-7 are for an
external speaker. See the table on the
right for speaker pin defi nitions.
Note : The speaker connector pins are
for use with an external speaker. If you
wish to use the onboard speaker, you
should close pins 6-7 with a jumper.
PS/2 Keyboard and
Mouse Ports
Pin Defi nitions
Pin# Defi nition
1 Data
2 NC
3 Ground
4 VCC
5 Clock
6 NC
Speaker Connector
Pin Defi nitions (JD1)
Pin # Function Defi nition
4 + Speaker data (red wire)
5 Key No connection
6 Key
7 Speaker data
Overheat LED
Connect an LED to the JOH1 header to
provide warning of a chassis overheat-
ing condition. See the table on the right
for pin defi nitions.
Overheat LED
Pin Defi nitions
(JOH1)
Pin# Defi nition
1 +5V
2 OH Active
SGPIO
The two headers labeled T-SGPIO-1
and T-SGPIO-2 are for SGPIO (Se-
rial General Purpose Input/Output).
SGPIO supports serial link interfaces
for onboard SATA and SAS ports. Con-
nect the appropriate cables from the
backplane to the SGPIO1 and SGPIO2
headers to utilize SATA/SAS manage-
ment functions on your system.
SGPIO Headers
Pin Defi nitions (T-SGPIO-1, T-SGPIO-2)
Pin# Defi nition Pin # Defi nition
1 NC 2 NC
3 Ground 4 Data
5 Load 6 Ground
7 NC 8 NC
Note: NC indicates no connection.