Supero SUPERSERVER 1026T-UF, Руководство пользователя

Страница: 11 / 118

1-3
Chapter 1: Introduction
Graphics Controller
The X8DTU-F features an integrated Matrox G200eW graphics chip, which includes
8 MB of DDR2 memory.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, auto-switching voltage regulators, chassis and CPU overheat sensors, virus
protection and BIOS rescue.
1-3 Server Chassis Features
The SC113 features eight 2.5" hard drive bays and high-effi ciency power supplies.
The 1026T-URF is built upon the SC113TQ-R650UB chassis while the 1026T-UF
is built upon the SC113TQ-560UB chassis. Details on the chassis and on servicing
procedures can be found in Chapter 6.The following is a general outline of the main
features of both chassis.
System Power
The SC113TQ-R650UB features a redundant 650W power supply consisting of
two power modules. The system does not need to be shut down when replacing or
removing a single power supply module.
The SC113TQ-560UB features a single 560W power supply module. The system
must be shut down when replacing or removing this power supply module.
PCI Expansion Slots
A riser card (RSC-R1UU-E8PR, optional) on the right side of the chassis can sup-
port AOC-PG-i2+ add-on card to provide two Gb LAN ports. The left side supports
a UIO card and one PCI-E x16 card. These two systems can support four SAS/
SATA drives with an optional UIO SAS card. See our web site for details (http://
www.supermicro.com/products/nfo/UIO.cfm).
See page 5-10 for details. (Right and left refer to the side when viewed from the
front of the system.
Control Panel
The SC113 control panel provides important system monitoring and control informa-
tion. LEDs indicate power on, network activity, hard disk drive activity and a UID
(Universal Information) LED. Also present are a main power button, a system reset
button and a UID button.