Supero SuperServer 1012G-MTF, Руководство пользователя

Страница: 13 / 96

1-3
Chapter 1: Introduction
Other Features
Other onboard features that promote system health include onboard voltage
monitors, a chassis intrusion header, 3-phase switching voltage regulators, chassis
and CPU overheat sensors, Thermal Monitor 2 (TM2) support and a BIOS fl ash
upgrade utility.
1-3 Server Chassis Features
The following is a general outline of the main features of the SC813MTS-350C
chassis.
System Power
When confi gured as a SuperServer 1012G-MTF, the SC813MTS-350C chassis
includes a single 350W power supply.
SATA Subsystem
For the 1012G-MTF, the SC813MTS-350 chassis was designed to support four
SATA hard drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the
hot-swap capability of the SATA drives (system-based RAID is not available for
SATA).
Control Panel
The SC813MTS-350C's control panel provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activity
and system overheat conditions. The control panel also includes a main power
button and a system reset button. The front of the SC813MTS-350C also includes
a COM port and two USB serial ports for easy access.
Rear I/O Panel
The SC813MTS-350C is a 1U rackmount chassis. Its I/O panel provides one PCI
motherboard expansion slot, one COM port (another is internal), two USB ports, a
parallel (printer) port, PS/2 mouse and keyboard ports, a VGA port and two 1-Gb
Ethernet ports.