Supero 5037A-I, Руководство пользователя

Страница: 57 / 102

Chapter 6: Advanced Chassis Setup
6-5
6-4 Removing the Chassis Side Covers
The SC732D4-900B features two removable side covers, allowing easy access to
the chassis interior.
Removing the Side Covers
1. Disconnect the chassis from any power souce.
2. Remove the two screws securing the left side cover to the chassis.
3. Slide the left cover toward the rear of the chassis.
4. Lift the left cover from the chassis.
5. Remove the three screws securing the right side cover to the chassis.
6. Slide the right cover toward the rear of the chassis
7. Lift the right cover from the chassis.
Caution: Except for short periods of time, do NOT operate the system without the
cover in place. The chassis cover must be in place to allow for proper airflow and
to prevent overheating.
Additional warnings and cautions can be found on the Supermicro Web site at http://
www.supermicro.com/about/policies/safety_information.cfm.
Figure 6-3: Removing the Chassis Side Covers
1
3
1
6
2
2 1
5