Supermicro SUPERSERVER 5028TK-HTR, Руководство пользователя

Страница: 54 / 138

SUPERSERVER 5028TK-HTR/HTTR User's Manual
5-4
5-5 Installing Memory
Installing Memory
1. Insert each memory module vertically into its slot, paying attention to the
notch along the bottom of the module to prevent inserting the module
incorrectly (see Figure 5-3).
2. Starting with slot DIMMA1, gently press down on the memory module until it
snaps into place.
3. See the tables that follow for details on populating the DIMM slots.
Note : It is highly recommended that you remove the power cord from the system
before installing or changing memory modules. Refer to our website for memory
that has been tested on the K1SPi/K1SPi-T serverboard. For best performance, use
memory modules of the same type and speed in the same bank.
Memory Support
The K1SPi/K1SPi-T has six DIMM slots to support up to 384 GB of RDIMM
(Registered DIMM) DDR4-2400 ECC memory.
Note : Check the Supermicro website (www.supermicro.com) for the latest memory
support information.
Figure 5-3. DIMM Installation
Release Tab
Socket Key
Release Tab
Processor & Memory Module Population Configuration
For memory to work properly, follow the table below for memory installation
Memory Module Population for Optimal Performance
DIMMs per Channel Memory Installation Sequence
Populating 1 DPC DIMM-A1/B1/C1,
DIMM-D1/E1/F1
(*All 6 DIMMs are needed)
Note : For optimal memory performance, install DIMMs in all slots.