![Supermicro SUPERSERVER 5028TK-HTR Скачать руководство пользователя страница 110](http://html.mh-extra.com/html/supermicro/superserver-5028tk-htr/superserver-5028tk-htr_user-manual_1404590110.webp)
7-26
SUPERSERVER 5028TK-HTR/HTTR User's Manual
SR-IOV (Available if the system supports Single-Root Virtualization)
Select Enabled for Single-Root IO Virtualization support. The options are Enabled
and
Disabled.
ASPM Support
Select Enable to support the Active State Power Management (ASPM) level for a
PCI-E port specified by the user. Select Disabled to disable ASPM support. The
options are Force L0s, Auto, and
Disabled.
Maximum Payload
Select Auto for the system BIOS to automatically set the maximum payload value for
a PCI-E device to enhance system performance. The options are
Auto
, 128 Bytes,
256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
Maximum Read Request
Select Auto for the system BIOS to automatically set the maximum size for a read
request for a PCI-E device to enhance system performance. The options are
Auto
,
128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
MMIOHBase
Use this item to select the I/O base memory size according to memory-address
mapping for the PCH chip. The base memory size must be between 4032G to
4078G. The options are
56T
, 48T, 24T, 512G, and 256G.
SXB1 PCI-E x16 OPROM/SXB2 PCI-E x4 OPROM/SXB3 PCI-E x16 OPROM
Select Enabled to enable Option ROM support to boot the computer using a de-
vice installed on the slot specified by the user. The options are Disabled,
Legacy
and EFI.
Onboard LAN Option ROM Type OPROM
Use this feature to configure the type of device for the LAN port specified by the
user to be used for system boot. The options are
Legacy
and EFI.
Onboard LAN1 Option ROM/Onboard LAN2 Option ROM
Use this option to select the type of device installed in LAN Port1 and LAN Port2
for system boot. The default setting for LAN1 Option ROM is
PXE
, for LAN2 Op-
tion ROM is
Disabled
.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni-
fied Extensible Firmware Interface) for network stack support. The options are
Enabled and
Disabled
.
Содержание SUPERSERVER 5028TK-HTR
