Supermicro 6028R-E1CR12L, Руководство пользователя

Страница: 68 / 140

5-22
S
UPER
S
TORAGE
S
YSTEM 6028R-E1CR12L User's Manual
I
2
C to PCI-E Slots
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
I
2
C Bus to PCI-Exp. Slots
Jumpers JI
2
C1 and JI
2
C2 allow you
to connect the System Management
Bus (I
2
C) to the PCI-Express slots to
improve PCI performance. The default
setting is Enabled. Both jumpers must
be set to the same setting See the
table on the right for jumper settings.
LAN Enable/Disable
JPL1 enables or disables the Gb LAN
ports on the serverboard. See the
table on the right for jumper settings.
The default setting is Enabled.
GLAN Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
BMC Enable
Jumper JPB1 allows you to enable
the embedded the ASpeed AST 2400
BMC (Baseboard Management) Con-
troller to provide IPMI 2.0/KVM sup-
port on the serverboard. The default
setting is Enabled. See the table on
the right for jumper settings.
BMC Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
ME Mode Select
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 Manufacture's Mode
Manufacturer's Mode
Jumper JPME2 allows the user to
flash the system firmware from a
host server in order to modify system
settings. Close this jumper to bypass
SPI flash security, and force ME into
recovery mode in order to use recov-
ery jumpers. See the table on the right
for jumper settings.