Supermicro 6028R-E1CR12L, Руководство пользователя

Страница: 10 / 140

1-2
S
UPER
S
TORAGE
S
YSTEM 6028R-E1CR12L User's Manual
1-2 Serverboard Features
The SuperStorageSystem 6028R-E1CR12L is built around the X10DRH-iT, a dual
processor serverboard based on the Intel C612 chipset. Below are the main features
of the X10DRH-iT. (See Figure 1-1 for a block diagram of the chipset.)
Processors
The X10DRH-iT supports single or dual Intel® Xeon E5-2600 (v3/v4) Series pro-
cessors. Please refer to the serverboard description pages on our website for a
complete listing of supported processors (www.supermicro.com).
Memory
The X10DRH-iT has 16 DIMM slots that can support up to 2 TB of ECC LRDIMM
(Load Reduced DIMMs) or 1 TB of ECC RDIMM (Registered DIMMs) DDR4-
2400/2133/1866/1600 memory. See Chapter 5 for details.
Main Storage Controller
An LSI 3008 controller card is included in the system to support up to 240 SATA
3.0/SAS 3.0 hard drives. The SATA/SAS drives are hot-swappable units.
Serial ATA
A SATA controller is integrated into the chipset to provide 10 SATA 3.0 (6/Gbps)
ports (I-SATA0-5 supported by the Intel PCH and a vertical. 4-port S-SATA con-
nection supported by the Intel SCU), which are RAID 0, 1 and 10 supported. The
SATA drives are hot-swappable units. (RAID 5 supported with Windows OS only.)
PCI Expansion Slots
The X10DRH-iT has six PCI-Express 3.0 x8 slots (CPU1 Slots 1-3 and CPU2 Slots
5-7) and one PCI-Express 3.0 x16 slot (CPU2 Slot4).
Rear I/O Ports
The I/O ports include one COM port, a VGA port, four USB (two USB 3.0 and two
USB 2.0), two 10G (TLAN) Ethernet ports, a dedicated IPMI LAN port and dual
JBOD expansion ports. A UID (Unit Identifier) button and LED are also located
beside the VGA port.